Astron Clearsplint CAD/CAM Pro Super Economy Kit, 960g powder/ 720g monomer
Advantages
- Extremely break-proof, offers an optimal protection for the natural teeth
- Thermo-active flexibility for excellent, comfortable and stress-free wear
- Hypoallergenic, MMA-free
- Self-adjusting with memory effect
- Long-lasting transparency – no yellow discoloration, as the material is free of amine
Properties
- Relieving the joint in case of bruxism
- Protecting full metal crowns and implant-supported restorations
- Readjusting the bite etc.
Description
MMA-free and thermo-active acrylic for the production of high quality functional splints with CAD/CAM technology. Lean more now!
Product number:
SW-220391
Questions about the product? We are glad to be here for you!
Product information "Astron Clearsplint CAD/CAM Pro Super Economy Kit, 960g powder/ 720g monomer"
Clearsplint® CAD/CAM pro – The ideal solution for indications such as relieving the joint in case of bruxism, protecting full metal crowns and implant-supported restorations, readjusting the bite etc.
Benefits:
- Extremely break-proof, offers an optimal protection for the natural teeth
- Thermo-active flexibility for excellent, comfortable and stress-free wear
- Hypoallergenic, MMA-free (residual monomer MMA = 0 %)
- Self-adjusting with memory effect
- Long-lasting transparency – no yellow discoloration, as the material is free of amines
Present the advantages of excellent wearing comfort and flexibility of the splint to your customers The splint is an optical highlight, because it remains complete transparet.
Brochures and further information on this product
Cutsomers also bought
FuturaJet powder, pink, pink, 1000 g
FuturaJet is the multi-talent in the acrylics world. It is eminently suitable for the injection method and all conventional acrylics techniques. Your benefits: Wide choice of colors Easy to use Universally applicable Excellent mechanical properties Extraordinary fit Polymerization: Flask temperature 35 °C (95 °F), injection pressure 30 min. Polymerization time: 15 min. at 2-4 bar, water temperature 45 °C (113 °F). Mixing ratio powder:liquid (weight [g]): 2:1 (free dosage) Processing time: 4.5 min. Physical properties: Vickers hardness: ca. 140 MPa Flexural strength: ca. 95 MPa E-module: ca. 2,700 MPa Water absorption: 23.3 µg/mm³ Water solubility: 1.1 µg/mm³ Residual monomer: complies with the standard 12 kg containers upon request.FuturaJet liquid is available in 0.5 l or 1 l containers.
T3/T8 Tizian Cut 5/3.5 ball-headed metal drill 1,5, CoCr/Ti balltop
Ball-end mill, double-edged, edge Ø 1.5 mm, shaft Ø 6 mm, total length 48 mm Processing type: drilling a screw channel Blank material: CoCr, titanium Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
Tizian Blank PMMA Splint, 98 mm x 20 mm in 10s bulk packaging
Tizian Blank PMMA Splint is made of a highly pure themoplastic PMMA which is produced following the highest quality standards. The crystal clear, color-stable material stands out with its homogeneity, low plaque adhesion and low water absorption. Tizian Blank PMMA Splint is an economic alternative for the splint technology. It can be be repaired and extended with PMMA acrylics. Indications: Occlusion splints Drilling templates for navigated implantation Lost wax technique in casting technology Processing: Due to the chemical and physical properties of thermoplastic PMMA, there is a risk of melting the material during dry machining and thus smearing the mills. Therefore, it is important to use only single-edged mills. If necessary, the milling strategy must be adjusted with a slower cutting speed and a lower feed rate. The material can be processed by wet machining with PMMA mills in a standard strategy without restrictions.
T11 Tizian Cut 5/3.5 PMMA finemilling single point mill, 2,5 mm, 6 mm shaft
Radius cutter single-edged, edge Ø 2.5 mm, shaft Ø 6 mm, total length 53 mm, max. blank height = 25 mm. Processing type: pilot milling Blank material: PMMA, PEEK Coating type: uncoated Ring color: gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
T46 Tizian 3.5 1.0 mm premium torus drill for CoCr/Ti, T46, for 6 mm chuck
T46 - Torus drill, triple-edged, edge Ø 1.0 mm, shaft Ø 6 mm, total length 45 mm. Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian Cut 5.2 Pro, Tizian Cut 5.2 Pro Plus, Tizian Cut 5.2, Tizian Cut 5.2 plus, CORiTEC 550i, CORiTEC 750i
