Locator abutment D = 5.3 mm GH = 5.0, (Cone Connection)
Variante:
5,3 mm / 5 mm
Modern prosthetic solution with the original Zest Locator abutment for the cover denture / full denture fixing technique for full or partial prostheses. The prosthesis keeps its firm hold due to the cylindrical shape of the Locator. The special shape of the retention facilitates a low installation height and a divergence equalisation up to 15°. Also in various sizes of acrylic holding matrices for polymerisation for the Impla conical connection range.
Conical connector 3.3 mm / 1 mm / 0°, Cone Connection incl. screw
Variante:
Konuskonnektor 3,3 mm / 1 mm / 0°
Set: The screw is included. This abutment made of titanium grade 5 with a conical implant connection geometry and a prefabricated emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Conical connector 5.3 mm / 1 mm / 0°, Cone Connection incl. screw
Variante:
Konuskonnektor 5,3 mm / 1 mm / 0°
Set: The screw is included. This abutment made of titanium grade 5 with a conical implant connection geometry and a prefabricated emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
torque wrench 4 Ncm,
Using this torque wrench the inner matrix is screwed into the matrix housing and set onto the patrix. Inner assembly matrices with blue acrylic inserts should not be used as permanent inner matrices in prostheses, they are intended exclusively for use in the dental laboratory.
Conical connector 5.3 mm Cone Connection
Variante:
15°/1 mm
This abutment made of titanium grade 5 with its conical implant connection geometry and its tailor-made emergence profile was specially developed for the IMPLA Cone Connection line. Supra constructions can be either cemented or adhesion-fixed.Available with gingiva heights of 1 mm, 3 mm or 5 mm and with angles of 0°, 15° or 20°.
Conical connector 3.3 mm Cone Connection
Variante:
15° / 1 mm
This abutment made of titanium grade 5 with conical implant connection geometry and ready-made emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Conical connector 4.2 mm Cone Connection
Variante:
15°/1 mm
This abutment made of titanium grade 5 with its conical implant connection geometry and its tailor-made emergence profile was specially developed for the IMPLA Cone Connection line. Supra constructions can be either cemented or adhesion-fixed. Available with gingiva heights of 1 mm, 3 mm or 5 mm and with angles of 0°, 15° or 20°.
Aesthura Abutment 3.3 mm/GH 1.2 mm, Cone Connection incl. screw
Variante:
Aesthura Abutment 3,3 mm / GH 1,2 mm
Aesthura® abutments by Dr. Neumeyer stand out by their special construction characteristics: They have an advantageously low overall height while still offering a huge retention surface. The abutments have been optimized regarding their performance physiology and feature a nearly perfect anti-rotation protection. When attached to the implant, they ease a cement-free temporary restoration. These abutments are suitable for almost any indication, especially in cases with very little occlusal space available. Their special surface creates an extremely large adhesive surface towards the individual supraconstruction without having to add to its height. In addtion, the screw-fixed scan abutment ensures an optimal integration into the digital workflow.
Conical connector 4.2 mm / 1 mm / 0°, Cone Connection incl. screw
Variante:
Konuskonnektor 4,2 mm / 1 mm / 0°
Set: The screw is included. This abutment made of titanium grade 5 with a conical implant connection geometry and a prefabricated emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Conical connector individually millable Hex connection incl. vertical screw
Variante:
3,3 mm
This abutment made of titanium grade 5 is individually adjusted at the lab to strong divergences in IMPLA Hex Connection implants.
Conical connector 3.3 mm individ. millable, Cone Connection incl. screw
Variante:
Konuskonnektor 3,3 mm ind. fräsbar
Set: The screw is included. This abutment made of titanium grade 5 is individually adapted by the lab in case that implants of the IMPLA Cone Connection series show a strong angulation.
Conical connector 3.3/0° GH=1, (for Cone Connection)
Variante:
3,3 mm / 1 mm
This abutment made of titanium grade 5 with conical implant connection geometry and ready-made emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Locator instrument, three-part,
Screwed stainless steel tip for removing retention inserts, mid section for repositioning the retention inserts, and gold coloured insertion aid for final screwing of the Locator®.
Conical connector 3.3 mm individ. millable, (for Cone Connection)
Variante:
3,3 mm
This grade 5 titanium abutment is adapted individually in the lab where angulation of greater than 15° is required with the IMPLA Cone Connection system.
,Adhesive base 3.3 mm CEREC, Cone Connection incl. screw
Variante:
Klebebasis CEREC 3,3 mm
Based upon the Sirona CEREC® System. CEREC® users now have the option of producing highly individual abutments. This is your set for individual abutments. The set contains all that you need for this task and helps you reduce the administrative complexity. The IMPLA CAD/CAM CEREC® adhesive base enables you to use CAD/CAM to design and manufacture customized implant abutments and single-tooth restorations for IMPLA implants. It is based on the Sirona CEREC® system. Every IMPLA CEREC® adhesive base has a laser inscription that specifies which ceramic block connection (S, L) and data path you should choose. Please order the Sirona scan bodies and ceramic blocks from your specialist retailer as usual.
Adhesive base 3.3 mm, Cone Connection incl. screw
Variante:
Klebebasis 3,3 mm
This is a set: The screw is already included!This titanium base is suited to an adhesive fixation of individual crowns as well as of bridgeworks made from ZrO2. We recommend the use of Sebond Implant and Alphalink Implant. Using this titanium base, you can glue both individual crowns and bridge constructions made from ZrO2. For this, we recommend Sebond Implant and Alphalink Implant.
Impression post 3.3 mm for closed impression, Cone Connection incl. screw blue + transfer cap
Variante:
Abdruckpfosten 3,3 mm, für GL
Closed Impression Technique The IMPLA impression posts are color-coded in line with the implant diameter and equipped with a transfer cover and vertical screw. A preassembled impression tray can be used for the closed tray impression technique. To secure the impression post in place, the vertical screw should be carefully hand-tightened both in the implant and on the laboratory implant using the 1.2 mm screwdriver. The transfer cover (repositioning aid) is pushed onto the impression posts until a noticeable pressure point is overcome and the transfer cover is clearly secure. equipped with a fixing screw (art. no. 636658) and transfer cover (art. no. 635495) "
PreFace Abutment (for Cone Connection)
Variante:
5,3 mm / D = 16 mm
Our PreFace®-Abutments facilitate the use of PreFace®-Abutment Holders by Medentika. The PreFace®-Abutments are available in the diameters 11.5 mm and 16 mm and with the connection geometries Hex Connection and Cone Connection. This offers the user the necessary variability. The abutments are made of titanium grade 5 which makes them easy and safe to handle. Titanium grade 5 is also highly biocompatible.Your benefits:With PreFace Abutments® you will achieve a superior added value by flexibility – Use our PreFace®-Abutments together with the PreFace®-Abutment Holders by Medentika. saving time – Two different blank diameters guarantee significantly shorter working times in production. exact definition of the zero position – The uniform length despite the different diameters lets you define the zero position almost exactly. variability – The two different diameters 11.5 mm and 16 mm facilitate flexible work. precision – The preset production processes as well as the standard production processes provide for even more precise results. Material: Titanium grade 5
PreFace Abutment (for Cone Connection)
Variante:
5,3 mm / D = 11,5 mm
Our PreFace®-Abutments facilitate the use of PreFace®-Abutment Holders by Medentika. The PreFace®-Abutments are available in the diameters 11.5 mm and 16 mm and with the connection geometries Hex Connection and Cone Connection. This offers the user the necessary variability. The abutments are made of titanium grade 5 which makes them easy and safe to handle. Titanium grade 5 is also highly biocompatible.Your benefits:With PreFace Abutments® you will achieve a superior added value by flexibility – Use our PreFace®-Abutments together with the PreFace®-Abutment Holders by Medentika. saving time – Two different blank diameters guarantee significantly shorter working times in production. exact definition of the zero position – The uniform length despite the different diameters lets you define the zero position almost exactly. variability – The two different diameters 11.5 mm and 16 mm facilitate flexible work. precision – The preset production processes as well as the standard production processes provide for even more precise results. Material: Titanium grade 5
Impression post 3.3 mm for OT Cone Connection, incl. fixation screw short
Variante:
3,3 mm, kurze Fixierschraube
Open Impression Technique The IMPLA impression posts are color-coded in line with the implant diameter and are equipped with a short or long fixing screw. The elongated section of the implant axis of the customized impression tray to be created must be perforated so that the fixing screw protrudes from the impression post. To secure the impression post in place, the fixing screw should be carefully hand-tightened both in the implant and on the laboratory implant using the 1.2 mm screwdriver.
activator / deactivator,
Using this wrench, the gold inner matrix can be compressed (activated) or expanded to match the position of the prosthesis.
Adhesive base, 3.3 mm, (for Cone Connection)
Variante:
3,3 mm
Using this titanium base (titanium grade 5), you can glue both individual crowns and bridge constructions made from ZrO2. For this, we recommend Sebond Implant and Alphalink Implant.
Locator adapter, with contra-angle connector,
Tool for unscrewing the Locator abutment with contra-angle or as an insert in conjunction with 636077 in the torque ratchet.
Adhesive base 3.3 mm, CEREC, (for Cone Connection)
Variante:
Klebebasis 3,3 mm, CEREC
Produce individual CAD/CAM designed and milled implant abutments and individual tooth restorations on IMPLA implants with the IMPLA adhesive base CAD/CAM CEREC®. Based upon the Sirona CEREC® System.
adapter ratchet for Locator adapter contra-angle,
Tool for manual unscrewing the Locator abutment in conjunction with 636075 in the torque ratchet.
Multi Unit gingiva sleeve (PEEK), incl. screw
PEEK gingiva sleeve for the Multi Unit System, can be adjusted individually. The IMPLA Multi Unit system has been specially developed for occlusally screw-retained permanent and removable bars, bridges, and total restorations. IMPLA Multi Unit abutments are available in three different angles (0°, 20°, and 30°). The abutments are directly joined with the respective implant via screw connection. This creates a fixed transgingival platform that can be used for all further prosthetic and laboratory measures. The 0° abutments have a pre-fitted screw thread and are screwed into the implant with the long or short insertion key. The vertical Multi Unit screw is used to attach the 20° and 30° abutments to the implant. This screw is screwed in using the long or short 1.2 mm screwdriver. All laboratory components are secondarily secured to the abutment base with the prosthetics screw using the long or short 1.2 mm screwdriver. For the range of recommended implants, please see the IMPLA instructions for use.
Impression post Multi Unit,
An impression aid for impressions of Multi Unit abutments on abutment level. Fix the impression aid on the Multi Unit abutments with help of the fixation screw OL.
Locator matrix set (3 parts),
In the smallest version, the Locator® has a total height of 3.3 mm with a retention housing and nylon insert. ,This makes the Locator® System also suitable in circumstances where vertical space is limited.
Lab implant 5.3 mm, Cone Connection
Variante:
5,3 mm
Titanium transfer element for accurate replication of implant position together with the impression aid for implants in the conical connection range. Can be used with both the open and the closed impression technique. ,
Locator replacement plugin, 4 pcs./clear,
Nylon matrix for insertion into the Locator matrix housing. With centric retention, 10° divergence compensation, shearing force 2.260 g.
Locator plugin, extra light retention 4 pcs./blue,
Nylon matrix for insertion into the Locator matrix housing. With centric retention, 10° divergence compensation, shearing force 680 g.
Locator plugin, extended range, light retention, 4 pcs./red
Nylon matrix for insertion into the Locator matrix housing. With centric retention, 20° divergence compensation, shearing force 220-680 g.
Acrylic abutment 4.2 mm, Conical Hybrid Connection,
Variante:
4,2 mm
Model and cast individual abutments with this burn out material which leaves virtually no trace. This acrylic abutment combines well with the modelling waxes and acrylics used in most dental labs. This gives clean casting results and a good fit for all your technical dental work. Thanks to precisely manufactured hexagonal connection of the acrylic structure, you have a high degree of rotation protection. Indications: Bar restorations Individual crowns Bridges Temporary abutment
Locator plugin, extended range, 4 pcs./green,
Nylon matrix for insertion into the Locator matrix housing. Without centric retention, 20° divergence compensation, shearing force 1.360-1.800 g.
Locator plugin, light retention, 4 pcs./pink,
Nylon matrix for insertion into the Locator matrix housing. With centric retention, 10° divergence compensation, shearing force 1.360 g.
inner matrix yellow/light,
Variante:
Gelb / Schwach
If the inner matrix is exchanged during a recall, it can be replaced in seconds by a completely new inner matrix, using a specially made torque wrench. Three color-coded inner matrices with standardized shearing force are available. With existing prostheses where the acrylic inner matrix appears too weak, this can be exchanged for the precious metal inner matrix very easily,without having to change the retention cap!
bar screw,
Connection screw for constructions on cone adapters, ensures permanent fixing of the supra construction on the cone adapter, as well as the bar and the screwed bridge construction, also with the SAE technique. ,
Gingiva sleeve PEEK, (for Multi Unit)
PEEK gingiva sleeve for the Multi Unit System, can be adjusted individually.
Scan abutment for Multi Unit,
This bowling pin shaped PEEK abutment is excellently suited for digital measuring with optical scanners or laser scanners. The Best Fit-function of the design software is precisely supported by an additional levelled surface.Preparing the scan abutment with scan spray is not necessary, as it is optimally scanned because of its dull whitish color.
Scanabutment 3,3 mm Conical Hybrid Connection
Variante:
3,3 mm
Abutment for digital scanning of model situations on the master model. For IMPLA Cone Connection. This PEEK abutment is especially well-suited for digital measurement with optical scanners or laser scanners, due to its bowling pin shape. The Best Fit-Function of the construction software is supported by an additional flattened surface. The scan abutment does not need to be prepared with scan spray due to its whitish matt color. Your benefits: Extraordinary digital measurement due to the bowling pin shape No preparation with scan spray necessary Easy recognition of the size with help of laser markings Made in Germany
Fixation screw OT for Multi Unit,
This fixation screw is suited to be used with the forming aid Multi Unit. Due to the knurling at the screw head, this screw is safe and easy to use.
