Dental Practices

Receive high-quality materials ""made in Germany"" for your practice and for your patients from Schütz Dental.

ARCA 20 preheating furnace,

This pre-heating oven with high-precision temperature control gives you very accurate control over the expansion of your investment material. Technical data: Voltage: 230 V~, 50-60Hz Power rating: 2000, 3000 W ARCA 20 pre-heating oven Continuous operation at the highest temperatures: 1050 °C Peak: 1150 °C Casting ring intake Ø 80x55 mm:4-6 Oven size: W x D x H 390 x 440 x 500 mm Chamber size: W x D x H 170 x 210 x 120 mm Weight: 34 kg ARCA 30 pre-heating oven Continuous operation at the highest temperatures: 1050 °C Peak: 1150 °C Casting ring intake Ø 80x55 mm:8-12 Oven size: pre-heating oven 435 x 460 x 560 mm Chamber size: W x D x H 220 x 300 x 150 mm Weight: 56 kg

Microclean, cleaning unit,

The MicroClean cleaning system cleans dentures automatically, gently, and in a way that is appropriate for the material involved. Even the strongest contaminants such as plaque and tartar can be automatically removed by MicroClean without any difficulty. Even in difficult to reach areas. No matter whether it is a denture that the patient has already worn or a newly made one - MicroClean cleans, polishes and pre-polishes e.g. crowns or bridges quickly and without material abrasion right into the finest inter-dental areas, fissures and telescopic tips. Benefits: Perfect automatic cleaning Especially for difficult, difficult to access areas (e.g. load distribution clasp) Top quality surface conditioning without any frictional loss! (telescopic restorations) Easy removal of fixing cement Makes ultrasonic cleaning unnecessary Significantly more efficient work, free from interruptions Basic equipment: Needles long, 150 g Plastic container Tweezers, 18 cm Holding magnet, complete Stand-up display Measuring cylinder, 50 ml 2 x 500 ml cleaning fluid (green and orange) Technical Data: Voltage: 230 V~ Power output: 200 VA Speed: 1450 rpm Number of phases: 1 phase-N+PE Neutral conductor: loadable N~ Protective conductor: separate protective conductor (PE green/yellow) Protection class: I Protection type: covered Frequency: 50/60 Hz Noise level: < 65 dB (A) Dimensions (w x d x h): 185 x 175 x 195 mm Weight: 7 kg

Enamel Plus Temp intro kit,

Aesthetic System for Acrylic TemporariesBiocompatible** – Non-toxic** – Reduced Plaque Accumulation** – Fluorescent Aesthetic Temporary Restorations""Enamel plus Temp"" helps you to imitate the tooth function as well as its aesthetic appearance. Temporary restorations made of ""Enamel plus Temp"" are an excellent basis for a holistic, diagnostic treatment. This offers the opportunity to dentist and patient to make adjustments in the temporary restoration which can be transferred to the permanent restoration later.Your benefits: Only a few steps to obtain an outstanding color match Special incisal shades Natural shades, close to natural tooth shades Exceptionally high surface hardness for durable restorations Polishes quickly and easily Extraordinary physical properties Content: 4 x Dentin, 50 g: UD2 (A2), UD3 (A3), UD3.5 (A3.5), UD4 (A4) 1 x Universal Enamel UE2, 50 g 1 x Opalescent Blue Enamel, 50 g 1 x Self-curing monomer liquid, 100 ml ** Cytotoxicity test with direct cell contact ASTM F 813-83 and with Agar diffusion according to ASTM F895-84 with test extraction irritation and allergy sensititzation test according to Buehler, OECD 406-92 and DIR CEE 93/21.

Relight sealing varnish,

Light-curing sealing lacquer for the surfaces of dentures and temporary crowns and bridges.

Alphalink Cem A2, 2 x 4g cartridge incl. 10 mixing cannula

Variante: A2

Alphalink Cem is a dual-curing fixing composite for natural teeth. Indications: Adhesive fixation of indirect restorations such as veneers, inlays, onlays, crowns and bridges. Suited to fixing restorations made from glass ceramics, zirconium dioxide, composite, Zirconia reinforced composite, precious metal, non-precious metal or titanium. Adhesive fixation of root pins and core build-ups (as core build-up material). Advantages: Extraordinary bonding strength on dentin and ceramics High radiopacity, radiopaque (210 % Al) Very high compressive strength of 290 MPa Automix cartridge for easy handling Transparent mixing tip High biocompatibility, as the material is free of Bis-GMA Long-term stability due to excellent physical properties Safe, because it is dual-curing Excellent aesthetics with three different colors Physical properties: E-module: 12.039 MPa bending strength: 118 MPa very high Vickers hardness: 549 MPa Curing time incl. working range: Room temperature ca. 21 °C (ca. 69.8 °F): ca. 7-9 min Intraoral 37 °C (ca. 98.6 °F): 3-4 min Sales units: 8 g automix cartridge Available colors: A2 and semi-transparent

Pins long 150g for Microclean,

Variante: Lang

Sebond Universal, 5 ml bottle

Sebond Universal is a single-component universal primer for strong adhesive bonding between luting materials such as Alphalink Cem and indirect restorations made from lithium disilicate glass ceramic, zirconium dioxide, precious metals, non-precious metals, titanium, Zirconia Reinforced Composite, composites. Its combination of three different methacrylates, silane methacrylate, phosphoric acid methacrylate and a sulfide methacrylate ensures strong and longlasting adhesion on the indirect restoration materials. Advantages: Universally applicable: just one primer for almost all dental restoration materials Extremely economical: One thin film is enough Across-the-board residence time of 60 seconds Easy to handle Longlasting, secure adhesion Economic dispensing option Does not contain Bis-GMA, TEGDMA or HEMA No light polymerization required Low-viscosity material ensures efficient, rapid application Conveniently storable at room temperature (refrigeration not required) No additional equipment needed "

Enamel plus Temp dentine UD0, 100g,

Variante: Enamel plus Temp dentine UD0, 100g

Enamel plus Temp - the acrylic for highly aesthetic temporary crowns and bridges. This material convinces due to the high opacity of the dentin masses and the translucence of the enamel masses. In order to improve the aesthetic properties and the durability of a long-term temporary restoration, a composite can be used instead of a lab acrylic. For this purpose, press Enamel plus Temp dentin with help of the silicone key and subsequently trim it incisally.

Enamel plus Temp universal enamel UE1, 100g,

Variante: Enamel plus Temp universal enamel UE1, 100g

Aesthetic system for acrylic temporaries Enamel plus Temp Universal Enamel offers the user the opportunity of 3 age-related enamel masses: UE1 for older teeth UE2 for grown-up teeth UE3 for young teeth All three powders can be mixed with each of the four monomer liquids: 400003 Light-curing monomer liquid 10 ml for opalescence and characterization 400004 Heat-curing monomer liquid 100 ml for the pressing technique (100 °C) 400039 Self-curing monomer liquid 100 ml for the stent technique 400041 Heat-curing monomer liquid 100 ml for the stent technique (90 °C)

Capo Hybrid Incisal medium, 5 g,

Variante: Incisal medium

Capo Hybrid is a light curing, hybrid composite which can be polished to a high gloss finish with an ultra fine, x-ray opaque glass filler for adhesive filling therapy. Due to the ultra-fine filling material, you can make extraordinarily homogeneous restorations which can be polished highly, and give an optimal colour match because of a targeted chameleon effect. Capo hybrid is available in the well known, practical 5g syringe or 0.3g application tips intended for one-off use. Capo Hybrid should be used together with the system components Capo Etch etching gel and Capo Bond.

Alphamat mixing tips, 100 pieces,

Accessory for dispenser (silicone)

Fluid

Variante: Orange (universal), 500 ml

Cleaning liquid for Microclean denture cleaner.

Holding magnet for Microclean,

Magnet is held against the outside of the beaker bottom to hold the needles while the cleaning liquid is drained and refilled.

Enamel plus Temp light curing liquid, 10 ml,

Variante: Enamel plus Temp light curing liquid, 10 ml

Aesthetic system for acrylic temporaries 400003 Light-curing monomer liquid 10 ml for opalescence and characterization400004 Heat-curing monomer liquid 100 ml for the pressing technique (100 °C)400039 Self-curing monomer liquid 100 ml for the stent technique400041 Heat-curing monomer liquid 100 ml for the stent technique (90 °C)

Relight adhesive agent,

Bonding agent

Capo flow B2, 2g syringe

Variante: B2

Fluid micro hybrid dental-composite which can be used to set under-fillings, fill small defects and seal fissures. Contents: 1x 2 g Capo Flow

Enamel plus Temp polishing brush, 12 pieces,

Enamel plus Temp polishing brushes + Enamel plus Temp polishing paste (art. no. 400044) for even more aesthetics and perfection: Give your highly aesthetic Enamel plus Temp temporary acrylic restorations the high gloss that they deserve.