Fluid green, 500 ml,,

Cleaning liquid for Microclean denture cleaner.

1 mm welding electrode for use with micro-impulse welding system Welder

Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%

3 in 1: Etching, Priming, Bonding in only one step directly in your patient's mouth!PrimeBond7 is a 7th generation self-etching and light-curing single-component adhesive that facilitates attaching standard filling composites (e.g. Capo Bulk Fill Plus or Capo Slow Flow) safely and reliably to natural tooth substances in just one step. Combine indirect restorations made of composite and ceramic (inlays, onlays, veneers, or crowns) with light-curing and dual-curing luting composites. An additional indication of the material is the repair of fractured composite fillings.The adhesive can be used for the self-etch or selective etch technique. Indications Direct, light-curing composite restorations on natural teeth Indirect restorations made of composite and ceramic (inlays, onlays, veneers, or crowns) with light-curing and dual-curing luting composites (e.g. Alphalink Cem) Repair of fractured composite fillings Compatible with standard light-curing composite materials Your benefits: Extraordinary, durable bond Quick and easy: etchant, primer, and bonding agent in one single bottle Reliable and safe: no risk of over-etching when using the self-etch technique Forms a homogeneous adhesive layer to reduce ‘pooling’ Clean work and economical use thanks to optimum drop control Gentle etching (pH value >, 2) reduces the risk of hypersensitivities No refrigeration necessary Good biocompatibility: free of both TEGDMA and MMA Physical PropertiesBond strength dentin: 26.0 MPaBond strength enamel: 24.0 MPapH value: >, 2Source: GDF Gesellschaft für dental Forschung Innovationen GmbH