FuturaJet powder pink-transparent veined,

Monomer liquid for your FuturaJet acrylic. FuturaJet is the multi-talent in the acrylics world. It is eminently suitable for the injection method and all conventional acrylics techniques. Your benefits: Wide choice of colors Easy to use Universally applicable Excellent mechanical properties Extraordinary fit Polymerization: Flask temperature 35 °C (95 °F), injection pressure 30 min. Polymerization time: 15 min. at 2-4 bar, water temperature 45 °C (113 °F). Mixing ratio powder:liquid (weight [g]): 2:1 (free dosage) Processing time: 4.5 min. Physical properties: Vickers hardness: ca. 140 MPa Flexural strength: ca. 95 MPa E-module: ca. 2,700 MPa Water absorption: 23.3 µg/mm³ Water solubility: 1.1 µg/mm³ Residual monomer: complies with the standard Availability of FuturaJet powder: 500 g or 1 kg container.  

FuturaJet is the multi-talent in the acrylics world. It is eminently suitable for the injection method and all conventional acrylics techniques. Your benefits: Wide choice of colors Easy to use Universally applicable Excellent mechanical properties Extraordinary fit Polymerization: Flask temperature 35 °C (95 °F), injection pressure 30 min. Polymerization time: 15 min. at 2-4 bar, water temperature 45 °C (113 °F). Mixing ratio powder:liquid (weight [g]): 2:1 (free dosage) Processing time: 4.5 min. Physical properties: Vickers hardness: ca. 140 MPa Flexural strength: ca. 95 MPa E-module: ca. 2,700 MPa Water absorption: 23.3 µg/mm³ Water solubility: 1.1 µg/mm³ Residual monomer: complies with the standard 12 kg containers upon request.FuturaJet liquid is available in 0.5 l or 1 l containers.  

With a translucency of 35 %.Indications:   Very aesthetic monolithic, fully anatomical crowns, partial crowns and bridges with up to 16-units, frameworks     Recommended for covering discolored tooth stumps or metal structures Advantages of monochromatic precolored blanks Why use precolored material? Applying a penetrating, homogeneous stain to the material does away with the need for processes such as dipping, painting and drying. This does not only save time and effort, but it also helps to avoid potential manual errors during the staining process. This reduces production costs and your customers will appreciate the consistent and reproducible color quality. Since the material comes fully precolored, even finishing or adjustment grinding do not leave light spots, which would have a negative effect on the appearance of the finished product. Industrially precolored zirconium blanks are reproducible. Precolored material is gentle on your sintering furnace and protects its components from damage. Acid-based liquid stains can emit fumes during the sintering process which leave deposits on the the heating elements of the furnace and contaminate them. This can cause undesirable discoloration and/or loss of translucency. Using industrially precolored zirconium ensures consistent color results. Suitable for: open milling system with a blank holder for round blanks with a diameter of 98.5 mm Material:   Zirconium type II, class 5 according to DIN EN ISO 6872   Good flexural strength of >, 1,150 MPa   Very high translucency of 35 % Good aging resistance Thin wall thicknesses for single crowns in the anterior tooth area 0.4 mm and in the posterior tooth area 0.6 mm   Biocompatible    

With a translucency of 35 %.Indications:   Very aesthetic monolithic, fully anatomical crowns, partial crowns and bridges with up to 16-units, frameworks     Recommended for covering discolored tooth stumps or metal structures Advantages of monochromatic precolored blanks Why use precolored material? Applying a penetrating, homogeneous stain to the material does away with the need for processes such as dipping, painting and drying. This does not only save time and effort, but it also helps to avoid potential manual errors during the staining process. This reduces production costs and your customers will appreciate the consistent and reproducible color quality. Since the material comes fully precolored, even finishing or adjustment grinding do not leave light spots, which would have a negative effect on the appearance of the finished product. Industrially precolored zirconium blanks are reproducible. Precolored material is gentle on your sintering furnace and protects its components from damage. Acid-based liquid stains can emit fumes during the sintering process which leave deposits on the the heating elements of the furnace and contaminate them. This can cause undesirable discoloration and/or loss of translucency. Using industrially precolored zirconium ensures consistent color results. Suitable for: open milling system with a blank holder for round blanks with a diameter of 98.5 mm Material:   Zirconium type II, class 5 according to DIN EN ISO 6872   Good flexural strength of >, 1,150 MPa   Very high translucency of 35 % Good aging resistance Thin wall thicknesses for single crowns in the anterior tooth area 0.4 mm and in the posterior tooth area 0.6 mm   Biocompatible    

With this polishing paste you can give your composite veneers the shine they deserve.