Mini Implant conetop, 3.0/9.5 mm, sterile,

Description

The one-piece Mini implant with conical top.

Product number: 635474
Questions about the product? We are glad to be here for you!
Product information "Mini Implant conetop, 3.0/9.5 mm, sterile,"

Just like their two part cousin, the single part implants in the IMPLA Mini range also have a high quality sanded and etched surface. Depending on the clinical case in question, the mini implants are also suitable for transgingival insertion, due to their size and shape. The short drilling protocol reduces the amount of surgery time needed. IMPLA Min implants are an economic alternative to two part implants. The Mini-conetop is a particularly impressive with bar treatment where space is limited.

Benefits:

  • Low 3 mm diameter for a minimally invasive insertion.
  • Highly pure, sanded and etched surface for safe osseointegration.
  • Self-tapping thread for fast, simple fitting.

Accessories

Prosthetic Set Mini,
Contains the transfer cap, a POM cap, a lab implant and the retaining screw for Mini-conetop.
Details
Lab analogue for mini implant contop,
Titanium transfer element for accurate replication of implant position for Mini Conetop range implants. For the closed impression technique. ,
Details
Steribox S, empty, A8/ for 1 module
Variante: für 1 Modul
Sterilization box available in sizes S, M and L, for the sterilization of surgical instruments.Dimensions size S (A8):  Outside dimensions: 90 x 90 x 55 mmInternal dimensions: 65 x 60 x 47 mm Dimensions size M (A6): Outside dimensions: 190 x 110 x 60 mmInternal dimensions: 165 x 92 x 49 mm Dimensions size L (A4): Outside dimensions: 290 x 190 x 60 mmInternal dimensions: 265 x 165 x 49 mm Sterisafe® DURO Sterilization container Sterility barrier and packaging system made from high-performance plastics Suited to almost all steam sterilization procedures under vacuum at temperatures of 121°C (249.8 °F) and 134°C (273.2 °F) as well as to low-temperature sterilization with gas (FORM and EO) and to H2O2/H2O2-plasma (in the following: VH2O2). Only tools which are suited to multiple sterilization and to this sterilization procedure must be sterilized in Sterisafe® DURO. Sterisafe® DURO sterilization container made from high-performance plastics: are translucent are highly shock-resistant (no dents) are >, pH 10 reprocessable can be sterilized with steam, plasma, EO or FO. are maintenance-free (no seal, no erosion), upper and lower part of the container close bacteria-proof according to Pasteur's principle are proven to save downtimes and service cost of your instruments have been well-proven for many years Sterisafe® DURO sterilization container have been designed in accordance with national / international standards and regulations DIN EN 868-1 and -8: 1999 DIN EN ISO 11607-1 and -2: 2006 CE marking in accordance with MDD 93/42 EWG
Details
POM for mini implant conetop,
Perfect fitting, burn out modelling aid for individual prosthetic constructions. Can also be used for tongue protection during the open healing phase.
Details
Transfer cap for Mini implant conetop,
By attaching the acrylic cap this locks on cleanly to the impression post or directly onto the connection on the Mini-conetop implant. After a successful impression, the transfer cap remains in the impression and helps fix the corresponding laboratory analogue. The acrylic transfer cap is not suitable for use more than once!
Details
Holding screw for Mini Conetop,
Use this mini screw for fixing prosthetic constructions on Impla Mini Conetop implants. 20 Ncm torque with the 1.2 mm SW screwdriver.
Details
Module Mini-Kit Implantology, assembled, size M
Adapt your IMPLA Mini surgical box according to your individual needs.  This compact tray contains all necessary drills and tools for the preparation of the implant site and for the insertion of IMPLA Mini Balltop and Conetop implants. As the tray manages without silicone plugs, it provides maximum hygiene. There is an option to extend the tray.
Details