Tizian Blank 98 x 18 mm, Zirconium Dioxide

You can mill very high quality bridges, crowns and other frameworks for ceramic veneering using this isostatically pressed zirconium oxide. Indications: Bridges (up to 16 units), crowns, can be veneered with ceramic (CTE 10.6 x 10-6K-1), Maryland bridges and much more.

T61 - metal roughing tool The complex geometry of the four high-capacity cutting edges (this is not a radius cutter!) facilitate a smooth operation, a much better service life and time savings of up to 50 % during the roughing procedure. Metal restorations are manufactured within ca. 10-15 min. in extraordinary quality. Please note that the special cutter geometry  requires a new strategy and new tool data in the CAM software. This tool does not replace the reliable T6! Diameter Ø 3.0 mm Cutting edges quadruple edge Shaft Ø 6 mm Cutting length: l = 15 mm Total length: 45 mm Max. blank height: 15 mm  Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian Cut 5.2 Series, Tizian Cut 5, CORiTEC 550i, CORiTEC 750i

Using this CAD/CAM blank you can mill your wax models and frameworks for moulding. The blank is available in several colors and heights. These blanks are characterised by a very good fit of subsequent work. Indications: Can be burned out as part of the casting technique during production of provisional restorations.

Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%

Radius cutter, short, double-edged, edge Ø 3 mm, shaft Ø 6 mm, total length 45 mm. Max. blank height = short up to 15 mm, long up to 20 mm. Processing type: coarse pre-roughing Blank material: CoCr, titanium Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i

There is a new zirconium dioxide for everyone!priti®multidisc ZrO? multicolor Extra Translucent with a translucence of 45 % and flexural strength >, 1,150 MPa. A cleverly devised zirconium dioxide concept which is an outstanding choice for almost every user. It makes working matchlessly easy. Beautiful &, strong! Real aesthetics - one fits all! Indications: priti®multidisc ZrO? Extra Translucent are excellently suited to the production of monolithic fully anatomic and partially or fully veneered crowns and bridges with up to 16 units individual abutments for anterior and side teeth on abutment teeth and implants What makes this product so special is its well-balanced relationship between high transparency and flexural strength. This indicates it for an especially wide range of indications.Material: Zirconium dioxide type II, class 5 according to DIN EN ISO 6872 Flexural strength >, 1,150 MPa Exceptional transparency of 45 % Thin wall thickness in the anterior tooth range of 0.4 mm and in the side tooth range of 0.6 mm for individual crowns Precise margins and edges because of a highly condensed material Can be veneered with close to every commercially available ceramic material which is adjusted to the CTE 10 · 10-6 K-1 of ZrO? Batch-independent color accuracy Homogeneous colorization Reproducible colors Biocompatible