FuturaGen, pink-opaque, 1000 g

The right prosthesis acrylic - when ""Good Enough"" just isn´t good enough. FuturaGen is the cold-curing acrylic with outstanding physical properties which sets new standards.   Benefits: Very high stability, making it also suitable for occlusal splints Extremely flat surface, reduces plaque accumulation Ideal for individualization, for example with Futura Intensiv paints, the PCS system and separate veins Very good fit due to low shrinkage: Also perfect for implant work "

Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%

Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%

Nun gibt es ein Zirkoniumdioxid für alle!priti®multidisc ZrO2 multicolor Extra Translucent mit einer Transluzenz von 45 % und einer Biegefestigkeit >, 1.150 MPa. Ein ausgeklügeltes Zirkonkonzept, das perfekt für fast jeden Anwender passt. So entsteht ein unnachahmlich einfaches Arbeiten. Schön &, Stark! Reale Ästhetik – One fits all! Indikation: Mit priti®multidisc ZrO2 Extra Translucent fertigen Sie monolithisch-vollanatomische und teil- oder vollverblendete Kronen und Brücken bis 16 Glieder, individuelle Aufbauten für den Front- und Seitenzahnbereich auf Zahnpfeilern und Implantaten. Die Besonderheit liegt in dem ausgewogenen Verhältnis: Hohe Lichtdurchlässigkeit und Biegefestigkeit. Damit empfiehlt sich das Material vorbehaltlos für ein besonders breites Indikationsspektrum. Material: Zirkoniumdioxid Typ II, Klasse 5 nach DIN EN ISO 6872 Biegefestigkeit >, 1.150 MPa Hohe Transluzenz von 45% Dünne Wandstärken im Frontzahnbereich 0,4 mm und Seitenzahnbereich 0,6 mm bei Einzelkronen Präzise Ränder und Kanten durch hochverdichtetes Material Verblendung ist mit jeder Keramikmasse möglich, die auf den WAK 10 · 10-6 K-1 von ZrO? abgestimmt ist Chargenübergreifende Farbtreue Homogene Einfärbung Stets reproduzierbare Farben Biokompatibel

"with graduated light transmission translucence of 49 % to 45 % Special features:Following the trend, a blank that combines the positive properties of the already established zirconium oxide qualities 4Y-TZP and the highly translucent 5Y-TZP in the enamel and in the body. Suitable for: highly esthetic monolithic, fully anatomic crowns, partial crowns and bridges with up to 14 units, inlays, onlays, veneers and abutments. Due to its high esthetics, it is particularly suitable for the anterior and visible tooth area. All processing techniques are possible: Staining, cut-back and veneering techniques are possible. The combination of 4Y (Extra Translucent with high strength) and 5Y (High Translucent with high translucency) results in improvements in the esthetic effect and safety for an unrestricted indication range of restorations. In addition to a smooth transition between the layers within the blank or restoration, we were able to achieve improved esthetics in relation to the Vita Classical Shade Guide. Graduated strength The smooth transition between the layers results in a graduated strength within the blank or restoration. This makes Tizian Blank MT + suitable for almost all indications. Material Zirconium dioxide type II, class 5 according to DIN EN ISO 6872 Flexural strength: typical mean value ? 1,100 MPa Translucence graduation of <

The right prosthesis acrylic - when ""Good Enough"" just isn´t good enough. FuturaGen is the cold-curing acrylic with outstanding physical properties which sets new standards.   Benefits: Very high stability, making it also suitable for occlusal splints Extremely flat surface, reduces plaque accumulation Ideal for individualization, for example with Futura Intensiv paints, the PCS system and separate veins Very good fit due to low shrinkage: Also perfect for implant work "