Dental Practices

This pre-heating oven with high-precision temperature control gives you very accurate control over the expansion of your investment material. Technical data: Voltage: 230 V~, 50-60Hz Power rating: 2000, 3000 W   ARCA 20 pre-heating oven Continuous operation at the highest temperatures: 1050 °C Peak: 1150 °C Casting ring intake Ø 80x55 mm:4-6 Oven size: W x D x H 390 x 440 x 500 mm Chamber size: W x D x H 170 x 210 x 120 mm Weight: 34 kg   ARCA 30 pre-heating oven Continuous operation at the highest temperatures: 1050 °C Peak: 1150 °C Casting ring intake Ø 80x55 mm:8-12 Oven size: pre-heating oven 435 x 460 x 560 mm Chamber size: W x D x H 220 x 300 x 150 mm Weight: 56 kg  

The MicroClean cleaning system cleans dentures automatically, gently, and in a way that is appropriate for the material involved. Even the strongest contaminants such as plaque and tartar can be automatically removed by MicroClean without any difficulty. Even in difficult to reach areas. No matter whether it is a denture that the patient has already worn or a newly made one - MicroClean cleans, polishes and pre-polishes e.g. crowns or bridges quickly and without material abrasion right into the finest inter-dental areas, fissures and telescopic tips. Benefits: Perfect automatic cleaning Especially for difficult, difficult to access areas (e.g. load distribution clasp) Top quality surface conditioning without any frictional loss! (telescopic restorations) Easy removal of fixing cement Makes ultrasonic cleaning unnecessary Significantly more efficient work, free from interruptions Basic equipment: Needles long, 150 g Plastic container Tweezers, 18 cm Holding magnet, complete Stand-up display Measuring cylinder, 50 ml 2 x 500 ml cleaning fluid (green and orange) Technical Data: Voltage: 230 V~ Power output: 200 VA Speed: 1450 rpm Number of phases: 1 phase-N+PE Neutral conductor: loadable N~  Protective conductor: separate protective conductor (PE green/yellow) Protection class: I Protection type: covered Frequency: 50/60 Hz Noise level: < 65 dB (A) Dimensions (w x d x h): 185 x 175 x 195 mm Weight: 7 kg

Capo Natural is an ultra fine micro-hybrid composite with optimized abrasion values. It is completely biocompatible due to the proven cell friendliness. Capo Natural from Schütz Dental allows you to work in a minimally invasive manner due to the optimized color adaptation. This minimizes the risk of secondary caries, without affecting the aesthetics. The benefits of Capo Natural: Bio-compatible and gentle on the gingiva Extraordinarily homogeneous restorations Works with most etching and bonding systems Suitable for minimally invasive surgery Bright, permanent colors High resistance to abrasion, combined with antagonist friendliness Easy to use Highly transparent incisal material Good polishing qualities Independent of any laboratory Low cost Excellent mechanical properties Indications: Direct anterior and posterior restorations in Black's classes I, II, III, IV and V Minimally invasive veneers and fillings Indirect restoration such as inlays, onlays and veneers Extensive fissure sealing in molars and premolars Core build-up Splinting loosened teeth Corrections of shape and color to improve aesthetics Content of the set: 6 x 4 g-syringe (colors: A2, A3, A3,5, B2, IM (=Incisal Medium), Occ (= Occlusal Clear)) "

Aesthetic System for Acrylic TemporariesBiocompatible** – Non-toxic** – Reduced Plaque Accumulation** – Fluorescent Aesthetic Temporary Restorations""Enamel plus Temp"" helps you to imitate the tooth function as well as its aesthetic appearance. Temporary restorations made of ""Enamel plus Temp"" are an excellent basis for a holistic, diagnostic treatment. This offers the opportunity to dentist and patient to make adjustments in the temporary restoration which can be transferred to the permanent restoration later.Your benefits: Only a few steps to obtain an outstanding color match Special incisal shades Natural shades, close to natural tooth shades Exceptionally high surface hardness for durable restorations Polishes quickly and easily Extraordinary physical properties Content: 4 x Dentin, 50 g: UD2 (A2), UD3 (A3), UD3.5 (A3.5), UD4 (A4) 1 x Universal Enamel UE2, 50 g 1 x Opalescent Blue Enamel, 50 g 1 x Self-curing monomer liquid, 100 ml ** Cytotoxicity test with direct cell contact ASTM F 813-83 and with Agar diffusion according to ASTM F895-84 with test extraction irritation and allergy sensititzation test according to Buehler, OECD 406-92 and DIR CEE 93/21.

Refill pack for your Bleach’n Smile tooth whitening system. The set contains 5 Bleach’n Smile bleaching gel syringes with 35 % hydrogen peroxide.  Bleach’n Smile Automix is an in-office bleaching gel, which is intended only for treatment in the dental practice.  Indication: For labial tooth surfaces Also suited for devital teeth Endo bleaching Benefits: Dependable and easy, time-saving application Excellent in-depth effect by means of 35 % hydrogen peroxide (after mixing) pH-neutral and gentle on the natural teeth The safety clip helps avoiding air bubbles during storage Contents: 5 Bleach’n Smile bleaching gel syringes with 35 % hydrogen peroxide

NanoPaq is a light-curing nano composite for adhesive filling therapy with an ultrafine glass filler. Because of the ultrafine filler the results are very homogenous restorations. The specifically adapted ""chameleon effect"" will help you obtain an optimal color adaptation of the filling. The fillings are also easy to check because of the product's high radiopacity. All these facts make NanoPaq an excellent choice for your anterior and posterior restorations in all Black's classes. Content of the set: 4 x 4 g-syringe (colors: A2/A3/A3,5/A4) Available colors: Incisal masses: InW (white), InTr (transparent), InBl (bleach), InU (universal), IR (red) Dentin masses: A1, A2, A3, A3.5, A4, B1, B2, B3, C2, D3 Opaque dentin: OD A2, OD B2 "

Light-curing sealing lacquer for the surfaces of dentures and temporary crowns and bridges.

3 in 1: Etching, Priming, Bonding in only one step directly in your patient's mouth!PrimeBond7 is a 7th generation self-etching and light-curing single-component adhesive that facilitates attaching standard filling composites (e.g. Capo Bulk Fill Plus or Capo Slow Flow) safely and reliably to natural tooth substances in just one step. Combine indirect restorations made of composite and ceramic (inlays, onlays, veneers, or crowns) with light-curing and dual-curing luting composites. An additional indication of the material is the repair of fractured composite fillings.The adhesive can be used for the self-etch or selective etch technique. Indications Direct, light-curing composite restorations on natural teeth Indirect restorations made of composite and ceramic (inlays, onlays, veneers, or crowns) with light-curing and dual-curing luting composites (e.g. Alphalink Cem) Repair of fractured composite fillings Compatible with standard light-curing composite materials Your benefits: Extraordinary, durable bond Quick and easy: etchant, primer, and bonding agent in one single bottle Reliable and safe: no risk of over-etching when using the self-etch technique Forms a homogeneous adhesive layer to reduce ‘pooling’ Clean work and economical use thanks to optimum drop control Gentle etching (pH value >, 2) reduces the risk of hypersensitivities No refrigeration necessary Good biocompatibility: free of both TEGDMA and MMA Physical PropertiesBond strength dentin: 26.0 MPaBond strength enamel: 24.0 MPapH value: >, 2Source: GDF Gesellschaft für dental Forschung Innovationen GmbH

Bleach’n Smile Automix is an in-office bleaching gel which is intended for treatment in the dental practice. It contains bleaching gel and activator in a self-mixing 4:1 double syringe (cartridge). One double syringe contains 5 g of material. The hydrogen peroxide content in the fully mixed gel amounts to 35 %. Indication: For labial tooth surfaces Also suited for devital teeth Endo bleaching Benefits: Dependable and easy, time-saving application Excellent in-depth effect by means of 35 % hydrogen peroxide (after mixing) pH-neutral and gentle on the natural teeth The safety clip helps avoiding air bubbles during storage Bleach’n Smile Automix Set contains: 1 x Bleach'n Smile Gel 35 % H2O2, 5 g 1 x Dental Dam, 1.5 g, incl. application tips 1 x After Bleaching Care Cream, 2 ml

After Bleaching is a water-based cream which re-mineralises and desensitises the teeth after whitening. Indication: Remineralization and desensitization of hypersensitive teeth Remineralization and desensitization of teeth after bleaching Benefits: Active protection from caries with xylitol Very effective due to a very special formula Pleasant taste Content:  5 x 2 ml syringe

Sebond Universal is a single-component universal primer for strong adhesive bonding between luting materials such as Alphalink Cem and indirect restorations made from lithium disilicate glass ceramic, zirconium dioxide, precious metals, non-precious metals, titanium, Zirconia Reinforced Composite, composites. Its combination of three different methacrylates, silane methacrylate, phosphoric acid methacrylate and a sulfide methacrylate ensures strong and longlasting adhesion on the indirect restoration materials. Advantages: Universally applicable: just one primer for almost all dental restoration materials Extremely economical: One thin film is enough Across-the-board residence time of 60 seconds Easy to handle Longlasting, secure adhesion Economic dispensing option Does not contain Bis-GMA, TEGDMA or HEMA No light polymerization required Low-viscosity material ensures efficient, rapid application Conveniently storable at room temperature (refrigeration not required) No additional equipment needed "

Refill set Dental Dam for certain protection of the gingiva.   Indication: Covering and protecting the gingiva Your Benefits: Good adhesion to the gingiva Only minor heat development Easy application Light-curing Sharp color contrast to the gingiva Takes less time than a rubber dam Excellent stability during application Contents: 4x 1.5 g syringe Dental Dam

Refill pack for your Capo Bond Set. Multifunctional, light-curing, 1-component ethanol-based adhesive system. Outstanding bond strength on dentin and enamel. Turn your Capo Bond adhesive system into a dual-hardening adhesive system with Capo Bond Activator. Ideal in places where light-curing is not an opition or in hard to reach places. Your benefits: Long-lasting high bond strength on etched dentin and etched enamel (30 MPa) Dual-hardening when used with Capo Bond Activator (20 MPa) High biocompatibility Compatible with most conventional brands of light-curing composite materials Excellent safety due to decades of experience Contents: 5 ml Capo Bond

Accessory for dispenser (silicone)

Work more quickly and more easily than ever before without compromising the physical properties. Save time with layers of up to 4 mm. Capo Bulk Fill is a light-curing composite for posterior restorations in the direct filling technique and for the “Bulk Fill”-technique. This quick and easy method is suitable for layers with a thickness of up to 4 mm. The stable flow material adapts really well to the bottom and walls of the cavity. Indications: Fillings with layer thicknesses of up to 4 mm in Black‘s class I cavities. Base fillings/liners with layer thicknesses of up to 4mm in Black‘s class II cavities. For the final layer in a class II cavity, only use composites which are suited to filling Black‘s class II cavities. Cavity lining – as a first (bottom) layer in Black‘s class I and II cavities. Your benefits: Biocompatible: 100% free of Bis-GMA, HEMA and TEGDMA Outstanding physical properties (total filler content ca. 77 % by weight) Excellent flow behavior Natural fluorescence Natural appearance due to a universal dentin shade No additional layers are necessary to cover class I cavities. Quick and easy to work with Easy to polish Minimal shrinkage provides for a very safe application High radiopacity (210 % AI) ensures a dependable diagnosis between the filling material and the natural tooth substance Independent: compatible with most bonding and composite systems Made in Germany  

Capo Universal is a light curing composite which can be polished to a high gloss finish with an ultra fine, x-ray opaque glass filler for adhesive filling therapy. You can make extraordinarily homogeneous restorations which can be highly polished, due to the ultra-fine filling material,and give an optimal colour match because of a targeted chameleon effect.

Fertigen Sie temporäre Kronen und Brücken aus unserem Temdent Classic auf PMMA-Basis. Durch die guten physikalischen Eigenschaften ist es auch für großspannige Arbeiten geeignet. Temdent Classic ist ein Autopolymerisat mit nur 0,8 % Restmonomergehalt.  Ihre Vorteile: Schnell, einfach und sicher in der Anwendung Kurze Aushärtezeit Individualisierbar, da die Farben miteinander gemischt werden können Sauberes Entfernen vom präparierten Zahn durch elastische Phase Hohe Bruchfestigkeit, daher auch für großspannige Arbeiten geeignet Exakte Farbstabilität Physikalische Eigenschaften: E-Modul: 2.300 MPa Biegefestigkeit: 90 MPa Vickers-Härte: 140 MPa Inhalt: 100 ml Flüssigkeit  

Capo Bulk Fill is a light-curing posterior tooth composite for the direct filling therapy and for restorations using the Bulk Fill-technique. This simple and quick technique is suitable for layers with a thickness of up to 4 mm. This highly viscous material adapts very well to the bottom and walls of the cavity. Indications: Fillings with a layer thickness up to 4 mm in cavities of Black's classes I and II Base fillings with a layer thickness up to 4 mm in cavities of Black's class II. Such base fillings in class II cavities must be covered with a composite suited to the treatment of class II cavities. Cavity lining - as a first (bottom) layer for cavities in Black's classes I and II Benefits: Quick and easy to work with, for a layer thickness of up to 4mm Minimal shrinkage = very safe to use Extraordinarily good physical properties (filler content approx. 77%) No additional layers required to cover the cavity = saves time High radiopacity (210 % Al) guarantees reliable diagnosis between the filling material and the natural tooth substance Compatible with most bonders and composite systems Biocompatible: 100 % free of bisphenol A, HEMA and TEG-DMA Universal dentin color = natural appearance Outstanding flow behavior Easy to polish

Magnet is held against the outside of the beaker bottom to hold the needles while the cleaning liquid is drained and refilled.

Bonding agent

Enamel plus Temp polishing brushes + Enamel plus Temp polishing paste (art. no. 400044) for even more aesthetics and perfection: Give your highly aesthetic Enamel plus Temp temporary acrylic restorations the high gloss that they deserve.

Standard-Behälter 500 ml für Ihr MicroClean/EcoClean.

Refill pack mixing tips. 10 pieces per package.

Accessory for Ecoclean/MicroClean cleaning systems

For measuring cleaning solution

Accessory for EcoClean/MicroClean, plastic container small

3 additional mixing tips for Bleach'n Smile bleaching gel