Dental Labs

QUICKLY MILL OCCLUSAL SPLINTS Perfect surfaces with consistent quality up to 10 splints per procedure one machine for two indications easy handling Convincing: economic and powerful The ECO-Maxi will let you combine up to 3 manual worksteps in one machine - pregrinding, fine finishing and polishing. Post-processing is automated and a perfect finish is guaranteed. No more manual intervention is required.The ECO-Maxi is ideally suited to process up to 10 splints per procedure and up to 50 splints per day.

The MicroClean cleaning system cleans dentures automatically, gently, and in a way that is appropriate for the material involved. Even the strongest contaminants such as plaque and tartar can be automatically removed by MicroClean without any difficulty. Even in difficult to reach areas. No matter whether it is a denture that the patient has already worn or a newly made one - MicroClean cleans, polishes and pre-polishes e.g. crowns or bridges quickly and without material abrasion right into the finest inter-dental areas, fissures and telescopic tips. Benefits: Perfect automatic cleaning Especially for difficult, difficult to access areas (e.g. load distribution clasp) Top quality surface conditioning without any frictional loss! (telescopic restorations) Easy removal of fixing cement Makes ultrasonic cleaning unnecessary Significantly more efficient work, free from interruptions Basic equipment: Needles long, 150 g Plastic container Tweezers, 18 cm Holding magnet, complete Stand-up display Measuring cylinder, 50 ml 2 x 500 ml cleaning fluid (green and orange) Technical Data: Voltage: 230 V~ Power output: 200 VA Speed: 1450 rpm Number of phases: 1 phase-N+PE Neutral conductor: loadable N~  Protective conductor: separate protective conductor (PE green/yellow) Protection class: I Protection type: covered Frequency: 50/60 Hz Noise level: < 65 dB (A) Dimensions (w x d x h): 185 x 175 x 195 mm Weight: 7 kg

Veneer your crowns and bridges with paste composite. You will be delighted with the great workability and aesthetic results. The set contains: Paste opaque, light, medium, dark Master dentine: A1/B1 A2 A3 A3,5 A4 B3/B4 C2/C3 D2/D3 Occlusal mass incisal: S57 S58 S59 S60

Transparent light flask for pressing technique in the composite segment.

Use this gold solder to solder your Alphador Eco technical dental work.  Only for sale in Germany.

Use this gold solder to solder your Alphador HP technical dental work. 

Use this post-solder to solder technical dental work which has already been veneered using Alphador Eco. Only for sale in Germany.

Use this gold solder to solder your Alphador Pdf me technical dental work. 

Use this gold solder to solder your Alphador Soleil technical dental work. 

Use this gold solder to solder your Alphador LF technical dental work.

Use this post-solder to solder technical dental work which has already been veneered using Alphador Soleil.  

The alloy for your cast attachments, implant supra-constructions and delicate frameworks.   Benefits: Extremely hard High elongation at break Easily removed oxide Excellent to polish Extremely bright sheen after polishing For delicate model casting Suitable for large and also delicate construction   Physical attributes Hardness: HV 398 Elongation at break: 6% Tensile strength: 980 µPa Specific weight: 8.3 g/cm2 Melting range: 1368-1385 °C   Both alloys contain <, 0.5% carbon. They are suitable for lasers and will not become brittle (heat cracks). Both alloys have been tried and tested for more than 25 years. They are biologically safe and bio-compatible. Naturally, neither alloy contains nickel or beryllium or any other contentious ingredients.

CoCr alloy specially for your delicate clamp frameworks.  , Benefits: Extremely high elongation at break (11%) Extremely high tensile strength (1680 N/mm 2) Easily removed oxide High level of safety and long life span Very high spring stiffness - particularly important for clamps Very good activation  , Physical attributes: Hardness: HV 340 Elongation at break: 11 % Tensile strength: 1.680 µPa Specific weight: 8.4 g/cm2 Melting range: 1343-1398 °C

KeySlide is a semi-automatic prefabricated titanium attachment for all indicated areas. Its simple principle and extremely small fitting size are impressive. KeySlide means easy handling. It slides the prosthesis in automatically and out again at the touch of a button. It guarantees simple and pleasantly manageable periodontal hygiene. KeySlide means high quality, precise combined restoration with the easiest possible handling. Cost and time savings, no soldering, no casting. KeySlide means a particularly patient friendly result. Due to its low volume installation mass, it can also be used with very deep occlusal conditions without shortening. It is made from titanium, guaranteeing bio-compatibility. Overloading abutment teeth and periodontium are eliminated due to the frictionless sliding of the prostheses.

Precision attachment for universal use in the intra-, inter- and extracoronal area. High level of comfort due to screw fixing of the patrix to the model cast. The patrix guide is an integrated part of the model cast, which removes the need for any soldering work. Transfer of the initial position to the investment material can take place both with reversible duplicating material and use of the original patrix, and also by processing the special duplication patrix in conjunction with silicone duplication. As it does not have to be soldered to the attachment fixing, potential causes of error are eliminated, and quicker, unproblematic exchange of the patrix is guaranteed - any exchange can be made in no time. By means of targeted use of the adjusting screw, the wings on the patrix can be spread open in a controlled manner, which permits effective and individual control of the amount of friction in the area of the attachment.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterised by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

The push button anchor for secure fixing of your technical dental work in the patient’s mouth.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

KeySlide is a semi-automatic prefabricated titanium attachment for all indication areas. Its simple principle and extremely small fitting size are impressive. KeySlide means easy handling. It automatically slides the prosthesis in and, at the touch of a button, out again.  It guarantees a simple and pleasantly manageable periodontal hygiene. KeySlide means high quality, precisely combined restoration with the easiest possible handling. Cost and time savings, no soldering, no casting. KeySlide gives you a particularly patient friendly result. Due to its low volume installation mass, it can also be used with very low occlusal conditions without shortening. It is made from titanium, guaranteeing bio-compatibility. Overloading abutment teeth and periodontium are eliminated due to the frictionless sliding of the prostheses.

Precision attachment for universal use in the intra-, inter- and extracoronal area. High level of comfort due to screw fixing of the patrix to the model cast. The patrix guide is an integrated part of the model cast, which removes the need for any soldering work. Transfer of the initial position to the investment material can take place either with reversible duplicating material and use of the original patrix, or by processing special duplication patrix in conjunction with silicone duplication. As it does not have to be soldered to the attachment fixing, potential causes of error are eliminated, and quicker, unproblematic exchange of the patrix is guaranteed - any exchange can be made in no time. By means of targeted use of the adjusting screw, the wings on the patrix can be spread open in a controlled manner, which permits effective and individual control of the amount of friction in the area of the attachment.

The keylock is an extra-coronal fitted attachment. It can be used in all indication areas in combined restorations. Due to its special construction,with its absolutely friction-free functionality, it ensures maximum protection of the abutment tooth from any force exerted during removal. This is an absolute must in implant treatment. The Keylock is processed in conjunction with cone or telescopic crowns or with RS milling. As the entire structure of the secondary unit (matrix box and attachment) can be removed from the secondary framework, it is also possible to veneer this area with ceramic. The acrylic primary unit can be cast alongside the crown or bridge alloy in question. The Keylock can be used in all standard areas for example in inter-dental saddle treatment,with a terminal abutment which has a ring telescope. If an abutment is lost, a unilateral free end treatment can be carried out, without model casting, with minimal effort, by means of a simple saddle extension.

The Keylock is an extra-coronal fitted attachment. It can be used in all indication areas in combination work. Due to its special construction, with its absolutely friction-free functionality, it ensures maximum protection of the abutment tooth from any force exerted during removal. This is an absolute must in implant treatment. The Keylock is processed in conjunction with cone or telescopic crowns, or with RS milling. As the entire structure of the secondary unit (matrix box and attachment) can be removed from the secondary framework, it is also possible to veneer this area with ceramic. The acrylic primary unit can be cast alongside the crown or bridge alloy in question. The Keylock can be used in all standard areas for example in inter-dental saddle treatment, with a terminal abutment which has a ring telescope. If an abutment is lost, a unilateral free end treatment can be carried out, without model casting, with minimal effort, by means of a simple saddle extension.

With this attachment you can adjust the level of friction completely individually on the activation screw. Greater height gives you very good guidance.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.

Push button anchoring system specially designed for all dental alloys. This long-renowned anchoring range, which is characterized by its uncomplicated handling, has been extended to include precision parts for new technological application areas. This means the dental technician can choose from a wide range of options, depending on different indications for treatment of the patient on the one hand, and the chosen working technique on the other. Alongside the classic threaded cap for soldering onto a model cast prosthesis, threaded caps for direct casting, which can also be used with the casting technique, are available. Also specially treated threaded caps for margin-tight fixing in prosthetic acrylic in the Sebond Smart procedure, a renowned, leading edge technology in the area of light-hardening materials, which are continuously growing in importance. To ensure sensible patient care, it is necessary to align the shearing force of the anchoring system and the physiological conditions. The Pro-anchor meets this requirement just as naturally as the demand for fine mechanical precision manufacturing at its best.