Tizian Blank 98 x 14 mm, Zirconium Dioxide
Properties
- Bridges (up to 16 units)
- Crowns
- Maryland bridges and much more
Description
You can mill very high quality bridges, crowns and other frameworks for ceramic veneering using this isostatically pressed zirconium oxide.
Product number:
624948
Questions about the product? We are glad to be here for you!
Product information "Tizian Blank 98 x 14 mm, Zirconium Dioxide"
You can mill very high quality bridges, crowns and other frameworks for ceramic veneering using this isostatically pressed zirconium oxide.
Indications: Bridges (up to 16 units), crowns, can be veneered with ceramic (CTE 10.6 x 10-6K-1), Maryland bridges and much more.
| Shape: | 98mm rund |
|---|
Cutsomers also bought
Tizian Blank 98 x 16 mm, Zirconium Dioxide
You can mill very high quality bridges, crowns and other frameworks for ceramic veneering using this isostatically pressed zirconium oxide. Indications: Bridges (up to 16 units), crowns, can be veneered with ceramic (CTE 10.6 x 10-6K-1), Maryland bridges and much more.
Tizian Blank PMMA Splint, 98 mm x 20 mm in 10s bulk packaging
Tizian Blank PMMA Splint is made of a highly pure themoplastic PMMA which is produced following the highest quality standards. The crystal clear, color-stable material stands out with its homogeneity, low plaque adhesion and low water absorption. Tizian Blank PMMA Splint is an economic alternative for the splint technology. It can be be repaired and extended with PMMA acrylics. Indications: Occlusion splints Drilling templates for navigated implantation Lost wax technique in casting technology Processing: Due to the chemical and physical properties of thermoplastic PMMA, there is a risk of melting the material during dry machining and thus smearing the mills. Therefore, it is important to use only single-edged mills. If necessary, the milling strategy must be adjusted with a slower cutting speed and a lower feed rate. The material can be processed by wet machining with PMMA mills in a standard strategy without restrictions.
Tizian Blank 98 x 12 mm, Zirconium Dioxide
You can mill very high quality bridges, crowns and other frameworks for ceramic veneering using this isostatically pressed zirconium oxide. Indications: Bridges (up to 16 units), crowns, can be veneered with ceramic (CTE 10.6 x 10-6K-1), Maryland bridges and much more.
Tizian Blank 98 x 10 mm, Zirconium Dioxide
You can mill very high quality bridges, crowns and other frameworks for ceramic veneering using this isostatically pressed zirconium oxide. Indications: Bridges (up to 16 units), crowns, can be veneered with ceramic (CTE 10.6 x 10-6K-1), Maryland bridges and much more.
Tizian Blank 98 x 18 mm, Zirconium Dioxide
You can mill very high quality bridges, crowns and other frameworks for ceramic veneering using this isostatically pressed zirconium oxide. Indications: Bridges (up to 16 units), crowns, can be veneered with ceramic (CTE 10.6 x 10-6K-1), Maryland bridges and much more.
T61 Tizian Cut 5/3.5 radius cutter 3.0 mm for Titan/CoCr, 4-bladed, 6 mm shaft
T61 - metal roughing tool The complex geometry of the four high-capacity cutting edges (this is not a radius cutter!) facilitate a smooth operation, a much better service life and time savings of up to 50 % during the roughing procedure. Metal restorations are manufactured within ca. 10-15 min. in extraordinary quality. Please note that the special cutter geometry requires a new strategy and new tool data in the CAM software. This tool does not replace the reliable T6! Diameter Ø 3.0 mm Cutting edges quadruple edge Shaft Ø 6 mm Cutting length: l = 15 mm Total length: 45 mm Max. blank height: 15 mm Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian Cut 5.2 Series, Tizian Cut 5, CORiTEC 550i, CORiTEC 750i