Enamel plus Temp self curing liquid, 100ml,

Radius cutter short, double-edged, edge Ø 1 mm, shaft Ø 6 mm, total length 45 mm. Max. blank height = short up to 15 mm, long up to 20 mm. Processing type: fine finishing Blank material: CoCr, titanium Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 650i

Monomer liquid for your FuturaJet acrylic. FuturaJet is the multi-talent in the acrylics world. It is eminently suitable for the injection method and all conventional acrylics techniques. Your benefits: Wide choice of colors Easy to use Universally applicable Excellent mechanical properties Extraordinary fit Polymerization: Flask temperature 35 °C (95 °F), injection pressure 30 min. Polymerization time: 15 min. at 2-4 bar, water temperature 45 °C (113 °F). Mixing ratio powder:liquid (weight [g]): 2:1 (free dosage) Processing time: 4.5 min. Physical properties: Vickers hardness: ca. 140 MPa Flexural strength: ca. 95 MPa E-module: ca. 2,700 MPa Water absorption: 23.3 µg/mm³ Water solubility: 1.1 µg/mm³ Residual monomer: complies with the standard Availability of FuturaJet powder: 500 g or 1 kg container.  

All-in-one. Multitalent. Neue verbesserte Formel. Universell einsetzbar. Ihre Vorteile: Jetzt noch schnellere Ausarbeitung und Politur für Top-Ergebnisse Breites Indikationsspektrum Noch universeller einsetzbar Noch einfacher in der Anwendung Noch bessere Passung Sicherere Verarbeitung: Hohe Fehlertoleranz Große Farbauswahl: 8 Farben: rosa, rosa-opak, rosa-geadert, rosa-transparent, rosa-transparent-geadert, rosa C, rosa K, klar Indikationen: All-in-one: Hervorragend geeignet für alle herkömmlichen Kunststofftechniken. Injektionsverfahren Reparaturen Modellgusskomplettierungen Totalprothesen Unterfütterungen Schienen

Tizian Blank PMMA Splint is made of a highly pure themoplastic PMMA which is produced following the highest quality standards. The crystal clear, color-stable material stands out with its homogeneity, low plaque adhesion and low water absorption. Tizian Blank PMMA Splint is an economic alternative for the splint technology. It can be be repaired and extended with PMMA acrylics. Indications: Occlusion splints Drilling templates for navigated implantation Lost wax technique in casting technology Processing: Due to the chemical and physical properties of thermoplastic PMMA, there is a risk of melting the material during dry machining and thus smearing the mills. Therefore, it is important to use only single-edged mills. If necessary, the milling strategy must be adjusted with a slower cutting speed and a lower feed rate. The material can be processed by wet machining with PMMA mills in a standard strategy without restrictions. 

Radius cutter, short, double-edged, edge Ø 3 mm, shaft Ø 6 mm, total length 45 mm. Max. blank height = short up to 15 mm, long up to 20 mm. Processing type: coarse pre-roughing Blank material: CoCr, titanium Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 650i

Aesthetics and durability combined to create a true multi-talent. The wonderful result of a merger between stability and natural beauty.Our new multi-talent is the ideal product to support you along your individual path to highly aesthetic and durable dental restorations. This blank follows the trend to combine the positive features of the already established zirconium quality of 3Y-TZP and the highly translucent 5Y-TZP. Just imagine mixing two different material classes... What could result from it is a unique raw material combination of a high-strength and highly translucent ZrO2. We just did it! When adding our new and innovative TILLY philosophy, the result was a multi-talented product which defines a completely new generation! Produce individual restorations for the anterior and posterior sector on natural tooth stumps and implants with priti®multidisc ZrO2 Multi Translucent.The special feature: graduation of shade and translucency with a simultaneous high flexural strength. These characteristics make priti®multidisc ZrO2 Multi Translucent an extraordinary and flexible choice for a wide range of indications.Benefits Excellent dental aesthetics Naturally graduated shade and translucency High stability: flexural strength >, 1,100 MPa (typical average) All processing techniques: painting technique, cut-back technique, veneering technique Quick sintering, complete processing time ca. 4 hours, released for up to 3 unit restorations High translucency in the incisal sector (>, 49 %), mechanical load capacity in the dentin sector Which is technique is your favorite?Select from these techniques: painting technique, cut-back technique, veneering technique. Indications: Individual restorations for the anterior and posterior sector on natural tooth stumps and implants  Highly aesthetic monolithic fully anatomic crowns, partial crowns and bridges of up to 14 units Inlays, onlays, veneers and abutments Quick sintering of restorations with up to 3 units Facts: Zirkonium dioxide type II, class 5 accordingt to DIN EN ISO 6872 Flexural strength: typical average ? 1,100 MPa Translucency graduation of <, 40 % to >, 49 % Thin wall thickness, in the anterior sector 0.4 mm and in the posterior sector 0.6 mm for individual crowns Precise margins and edges due to high density material Can be veneered with all ceramics which are adapted to the CTE of 10 · 10-6 · K-1 von ZrO2  Color stability across the batches Homogeneous coloration Reproducible colors Biocompatible