Lab implant 4.2 mm, Cone Connection
Description
Titanium transfer element for accurate replication of implant position together with the impression aid for implants in the conical connection range.
Product number:
638507
Questions about the product? We are glad to be here for you!
Product information "Lab implant 4.2 mm, Cone Connection"
Titanium transfer element for accurate replication of implant position together with the impression aid for implants in the conical connection range. Can be used with both the open and the closed impression technique. ,
| Verbindung: | Cone |
|---|
Accessories
Micro Retention implant (Cone Connection)
Variante:
3,3 mm / 11,5 mm
Just like its cousin with the Hex Connection, this implant is particularly suitable for use with cancellous upper jaw bones, due to its special micro thread, but it also offers a quick and safe solution in hard bone. The conical inner connector Cone Connection integrates the Platform Switching approach convincingly within the overall implant concept, and is aimed at users who do not want to go without the features of an inner cone in their daily work.
Cutsomers also bought
Lab implant 3.3 mm, Cone Connection
Titanium transfer element for accurate replication of implant position together with the impression aid for implants in the conical connection range. Can be used with both the open and the closed impression technique. ,
Impression post 4.2 mm for OT Cone Connection, incl. fixation screw short
Open Impression Technique The IMPLA impression posts are color-coded in line with the implant diameter and are equipped with a short or long fixing screw. The elongated section of the implant axis of the customized impression tray to be created must be perforated so that the fixing screw protrudes from the impression post. To secure the impression post in place, the fixing screw should be carefully hand-tightened both in the implant and on the laboratory implant using the 1.2 mm screwdriver.
Adhesive base 4.2 mm, Cone Connection incl. screw
This is a set: The screw is already included!This titanium base is suited to an adhesive fixation of individual crowns as well as of bridgeworks made from ZrO2. We recommend the use of Sebond Implant and Alphalink Implant. Using this titanium base, you can glue both individual crowns and bridge constructions made from ZrO2. For this, we recommend Sebond Implant and Alphalink Implant.
Tizian Blank NEM fine 98 mm
Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%